How To Install Fire Extinguisher Bracket

Installation of Fire Extinguishers

Installation and Commissioning of extinguishers is required for businesses and should be carried out by a BAFE-certified burn extinguisher service engineer. This ensures that the correct types of extinguishers are installed in the right location and are in working condition. The commissioning certificate provides proof of cover for insurance or legal purposes, should you be inspected by the fire services or accept a fire.

The following notes are aimed at self-installers in a purely domestic setting.

When wall-mounting, it is important to check for electric cables and pipework using a detector. For fitting, utilise appropriate wall fixings in conjunction with the manufacturer-supplied wall bracket. Additional back up may be needed when fitting heavier extinguishers to plasterboard walls.

Mounting Heights

The carrying handle of a portable fire extinguisher with a total gross mass of 4kg and above should exist approximately ane metre from the flooring. This pinnacle is raised to 1.5 metres for extinguishers weighing less than 4kg.

Two Extinguishers Mounted Next

When mounting two extinguishers (one extinguisher with a total mass above 4kg, and the 2d one beneath 4kg), both can exist mounted on the wall at the handle fixing height for the heaviest extinguisher.

Fire Extinguisher Stands

BS 5306-8: 2022 states that extinguishers should exist mounted as per the guidance above, only using a wall subclass to mountain your extinguishers isn't always possible. If so, a fire extinguisher stand, fire point, or extinguisher chiffonier tin be used. In this case, the peak recommendations for wall mounted extinguishers need not be followed.

A Note of Warning on 'Pre-Serviced' Fire Extinguishers

Occasionally, yous may meet online fire extinguisher retailers offering pre-serviced burn extinguishers. What they offer is the inspection of an extinguisher in their warehouse and the addition of a maintenance label on the extinguisher PRIOR to aircraft. Sometimes they fifty-fifty claim that this service is in accordance to BS 5306.

However, this do is Not in accordance to BS 5306. Damage to extinguishers in transit can cause loss of pressure, loss of extinguishing medium, bent pins and handles and may make the extinguisher inoperable. This tin can obviously not be detected whilst the extinguisher is in a warehouse. What is worse is that the presence of a service label indicates that the extinguisher has been commissioned on site by a competent person. This commissioning process should include the assessment of the suitability of the extinguisher blazon, ensuring that the right number of extinguishers are installed in the near suitable positions. Adding service labels to an extinguisher without this commissioning process puts lives at take a chance. British Standards therefore crave On Site Commissioning for all extinguishers installed nether BS 5306. This entails a full check of the extinguishers as they make it on site and the right weighing, training and certification of the extinguishers. Only so can you utilize the certification document as proof that you have taken your responsibility seriously.

Reviewed: 05/02/2021 (medico:25 V1.2) . Our articles are reviewed regularly. However, any changes made to standards or legislation following the review date will not have been considered. Please note that we provide abridged, easy-to-understand guidance. To brand detailed decisions about your burn safety provisions, you might require further communication or demand to consult the total standards and legislation.