How To Install Irobot Roomba

Setting upwards your Wi-Fi Connected Robot with the iRobot® HOME App

Use the following information to go through the Wi-Fi setup process.

Download the iRobot® Abode App onto your mobile device.

Place the Abode Base of operations® Charging Station or Clean Base of operations™ on a level surface that is free of obstacles in a location that has skilful Wi-Fi coverage, and so connect it to ability.

If your robot has ane, remove the yellowish battery pull tab and the xanthous bin insert
Place robot on the base of operations and ensure it is powered on

Open up the iRobot Abode App, create or sign-in to your account, and and so select "Add together a Robot".

Select the type of Robot you lot are adding and follow the prompts in the App

Connecting Roomba® Combo™ to the iRobot® Abode App

This robot is added by selecting "Add a Robot", and then "Roomba", followed by "Roomba Combo".

Step 1 - Complete Setup Checklist

Confirm you are ready to start:

Have your charging station and robot
Know your Wi-Fi network proper noun and Wi-Fi network password

Note: Roomba Combo robots just support 2.4GHz connectivity. If your phone is currently continued to a 5GHz Wi-Fi network, please connect to your 2.4GHz network instead. Click here for more help on 2.four vs 5GHz networks.

Step ii – Enable Location Services During Set-Up

During the set-up process, your Roomba Philharmonic will effort to identify and connect to your Wi-Fi network. You must allow location services for this to occur.

Select "Allow while using the app"

Step 3 - Home Base® Charging Station Placement

Verify that you have placed the Home Base® Charging Station:

In an area with good Wi-Fi coverage
On a difficult, level surface against a wall with a clear path that is free of obstacles for Roomba

Alert: To prevent the risk of your robot falling downwardly stairs, ensure that the charging station is placed at least iv ft (1.ii thousand) away from stairs.

Step iv – Name Your Robot

"Roomba" is preloaded – but what will you name your new Robot?

Type a name and continue

Step 5 - Connect Roomba® Combo to Your Wi-Fi

The iRobot® Habitation App volition display the proper noun of the Wi-Fi network that the mobile device is currently connected to.

If the 2.4GHz network is already selected, tap "Continue".
If the 5GHz network is selected, tap "Change Wi-Fi network" and choose the 2.4GHz network from the list.

iOS: To set Roomba® on a different network with an iOS device, select the Wi-Fi network in the iRobot® HOME App and change the network in the settings of the mobile device.

Enter your Wi-Fi network password.
If no password is required, check the box on the screen and continue.

Step 6 - Activate Roomba® Combo

This step turns on Roomba'due south internal Wi-Fi network and so that your device tin locate the robot.

Ensure the Robot is powered on and awake. With the robot on the Home Base, look for the Wi-Fi indicator light. Information technology should blink slowly.
- If not, open the lid and ensure the Power push button is in the "On" position ( | ) and close the lid.
- Press the Clean button on the robot to wake it up.
Activate the Robot:
- Open up the lid.
- Briefly press the RESET button for 1 second and then release. You volition hear a beep.
Confirm footstep in the App: check the tick box that says, "I pressed the push", and printing continue.
- This activates the internal Wi-Fi network inside Roomba philharmonic so that your device tin locate the Robot.
Tap "Join" to allow the App to connect to Roomba's Wi-Fi network on your device. This is a temporary connectedness.